The design would be simpler if the water travelled exactly at the same time.
It isn’t.
The amount of wastewater that enters a residential water system could fluctuate over the day. Industrial and commercial buildings could have operating peaks. The flow of stormwater can be affected by weather conditions. The need for clean water also varies according to the application.
Image credit: romtecutilities.com
To design the perfect pump station, it’s not just about selecting the equipment that will satisfy a specific flow. Engineers should be aware of the environmental conditions that the system will be exposed to.
Be aware of the operating conditions and not just the Maximum Capacity
The flow that is the highest in importance but it’s only one aspect of the station’s operations. Imagine that a wastewater treatment system was created to handle a huge maximum flow. For the most part the flow coming in is less. In normal operating hours, the station should still be functioning properly.
This raises questions such as wet-well sizing and sizing of the pump and control system the head’s condition, how to adjust equipment as demand changes.
A properly designed package pumping system brings these factors into the real needs of the facility instead of thinking of maximum pump capacity as the main design objective.
The daily routine of wastewater
The conditions of the influent at a wastewater liftstation serving households, businesses or municipal infrastructure can change over the course of the operation.
The station’s control strategy determines how the system is able to collect wastewater and operate its pumps. The structural dimensions, pumping equipment, valves piping, electrical components, and controls all have roles in the process.
Design may also take into account other considerations for the specific site. Romtec Utilities can incorporate auxiliary equipment like grinder vaults and odor control equipment when required by the application. The result is a system designed around the project instead of a generic design that is applied to all wastewater sites.
Stormwater can change much faster
A stormwater lift station may see relatively little activity during dry conditions and then face substantially greater inflow during a weather event. It could be part of a flood control plan or as a detention, treatment or drainage plan.
Romtec Utilities evaluates factors including needed flow rates along with head conditions, size of the system the site’s requirements, as well as environmental factors when designing these systems.
A station used for commercial property could therefore appear distinct from one that was designed for municipal stormwater applications.
Head conditions are important along with Flow
Engineers also need to know where the water is headed and the kind of resistance they be able to overcome. Engineers also need to know where the water will go and the level of resistance required by the pumping system.
The changes in elevation, the piping configuration as well as discharge conditions and other system characteristics influence the head conditions that pumps function.
The relationship between head and flow is a reason why selecting one based on capacity rating isn’t enough. The pump technology and the station’s configuration have to be adjusted to the hydraulic conditions throughout the application.
Plan for the Conditions that the Station will Experiece
Romtec Utilities develops customized pumping systems for stormwater, wastewater and clean water boosters, industrial and other purposes. The procedure may involve preliminary design and budgeting as well as complete plans sets as well as documentation starting, testing and commissioning.
The idea behind the system is as simple as this pumping systems can’t need to be able to operate for their entire life under the same set of conditions.
They face changing flow, fluctuating demand, and particular hydro requirements of the project. This must be taken into consideration when designing a station that is successful.
